Download your ELNA 3210 user guide or user manual

Liste of brands and manufacturers

Find the best products

Washing Machine
Dryer
Dishwasher
Iron
Vacuum Cleaner
Sewing Machine
Electric Shaver
Epilator
Oven
Microwave Oven
Coffee Maker
Cooking Table
Breadmaker
Fridge
Freezer
Wine Fridge
...

7.8/ 10

0	1	2	3	4	5	6	7	8	9	10

7.7/10

0	1	2	3	4	5	6	7	8	9	10

8.0/10

0	1	2	3	4	5	6	7	8	9	10

7.9/10

0	1	2	3	4	5	6	7	8	9	10

Manual abstract:

Depending on the weight of your fabric and sewing technique, you may need to change the pressure of the presser foot on the fabric. Reduce the pressure for appliqué, cut work, quilting and drawn work. 6 Presser Foot Lever and Additional Presser Foot Clearance Use this lever 1 to raise and lower the presser foot. When the presser foot is raised, tension discs are open. When the presser foot is lowered, tension discs are closed and sewing can begin. You can raise the presser foot about 6mm (1/4") higher than the normal up position for easy removal of the presser foot or to place heavy fabrics under the presser foot. Pull the presser foot lever up beyond the normal up position. 1 How to Snap Presser Foot Off and On To snap off: 2 3 1 Hand turn the flywheel toward you to raise the needle. OR Press the Up/Down Needle key until the needle is in an up position (Model 3230 only). Raise the presser foot. Press the presser foot release lever 1. The presser foot will drop off. To snap on: Place the presser foot so that the pin 2 on the foot lies just under the groove of the shank 3. Lower the shank to attach the foot. How to Remove and Attach the Shank 3 2 Raise the presser foot. Turn the setscrew 1 counterclockwise with the screwdriver to remove the shank. When attaching, align hole in shank 2 with hole in presser bar 3 and insert setscrew. Turn setscrew clockwise to tighten. 1 1 7 Thread Tension Dial Auto Tension (Model 3230 only) 1 The "Auto" setting on the tension dial is suitable for most sewing techniques. The setting mark 1 should be aligned with "Auto" unless otherwise indicated. Tension Adjustment for Straight Stitch In straight seams, the needle thread 2 and the bobbin thread 3 should lock together in the center of the two layers of fabric. (Model 3210 only ­ Needle thread tension can range from 3-5 with setting mark 1 usually on 4...

COMMENTS